NAFEMS LE10 Benchmarck

This benchmark is extract from the Abaqus Benchmarks Manual.

1. Definition

We focus on the LE10 benchmarks in particular.

2. Running the case

The command line to run this case is

mpirun -np 4 feelpp_toolbox_solid --case "github:{path:toolboxes/solid/NAFEMS-LE10}"
mpirun
Case option
--case "github:{path:toolboxes/solid/NAFEMS-LE10}"

3. Data files

The case data files are available in Github here

3.1. Geometry

The geometry is given here by :

3D Geometry

image::NAFEMS-le10/geo3d.png[alt="", align="center"]

where the thickness is 0.6.

In addition, we define the point E which is the midpoint of CC' and E' the midpoint of BB'.

3.2. Boundary conditions

We set:

  • uy=0 on DCD’C'

  • ux=0 on ABA’B'

  • ux=uy=0 on BCB’C'

  • ˉˉε⋅n=−1e6 on the top surface.

4. Inputs

We have the following parameters:

Table 1. Inputs
Name Value

E

210GPa

ν

0.3

ρ

7800kg/m2

5. Outputs

We want to compare the value of σyy at the point D. The reference value is 5.38MPa.

6. Results

The value of σyy at the point D is 5.53MPa for 300000 dofs, which is 2.78 higher than the target.

One possibility to get a more accurate output is to use a mixed formulation, where the stress tensor would also be an unknown.
NafemsLE10 disp vector
Figure 1. Displacement vector field